Smhaen Thread Splitter
Smhaen Thread Splitter
Splitting a single ply thread into two strands, allows space for materials such as deer hair, hackle barbs, and dubbing to be placed between the strands. once the materials is inserted, spin the bobbin holder to tighten the thread around the materials, then rap it around the hook shank. Splitting a thread has usually been done with a very pointed thin needle. The thread is flattened with the help of one's finger nail, and then the needle is pushed through the thread, of course if you can hit it. And the thinner the thread, the harder it is to hit it.
With a SMHAEN thread splitter, this is no longer a problem. and it does not matter if it is a thick or thin thread. The SMHAEN thread splitter does both easily. a smooth edge and a small knob on the end of the needle make it possible to split the thread. Flatten the thread on the shaft of the needle. Slide the thread to the knob at the end of the needle and allow the small edge to grip the individual fibers. Pull back slightly to allow the fibers to separate, then push the round knob through to split the thread into two strands.
OBS: Only single ply linear fiber threads can be split. Example: Since it is not a single ply, UNI-thread polyester types cannot be split.
The thread splitter handle is flat on one side to keep it from rolling off the table.
It just feels something special when you tie your flies with a quality tool, it gives so much greater joy and make the fly tying a much greater experience and pleasure. We think!
- Modern design
- Ergonomic look
- Easy to place on the thread
- Flat on one side to keep it from rolling off the table
- Perfect balanced weight
The thread splitter is in one size. It split single ply threads into two strands in different thread sizes.
TECHNICAL DATA:
Weight. 9 gram.
Length. 10,3 cm.
Diameter. 8 mm.
Smhaen Thread Splitter
Splitting a single ply thread into two strands, allows space for materials such as deer hair, hackle barbs, and dubbing to be placed between the strands. once the materials is inserted, spin the bobbin holder to tighten the thread around the materials, then rap it around the hook shank. Splitting a thread has usually been done with a very pointed thin needle. The thread is flattened with the help of one's finger nail, and then the needle is pushed through the thread, of course if you can hit it. And the thinner the thread, the harder it is to hit it.
With a SMHAEN thread splitter, this is no longer a problem. and it does not matter if it is a thick or thin thread. The SMHAEN thread splitter does both easily. a smooth edge and a small knob on the end of the needle make it possible to split the thread. Flatten the thread on the shaft of the needle. Slide the thread to the knob at the end of the needle and allow the small edge to grip the individual fibers. Pull back slightly to allow the fibers to separate, then push the round knob through to split the thread into two strands.
OBS: Only single ply linear fiber threads can be split. Example: Since it is not a single ply, UNI-thread polyester types cannot be split.
The thread splitter handle is flat on one side to keep it from rolling off the table.
It just feels something special when you tie your flies with a quality tool, it gives so much greater joy and make the fly tying a much greater experience and pleasure. We think!
- Modern design
- Ergonomic look
- Easy to place on the thread
- Flat on one side to keep it from rolling off the table
- Perfect balanced weight
The thread splitter is in one size. It split single ply threads into two strands in different thread sizes.
TECHNICAL DATA:
Weight. 9 gram.
Length. 10,3 cm.
Diameter. 8 mm.
Smhaen Thread Splitter
Splitting a single ply thread into two strands, allows space for materials such as deer hair, hackle barbs, and dubbing to be placed between the strands. once the materials is inserted, spin the bobbin holder to tighten the thread around the materials, then rap it around the hook shank. Splitting a thread has usually been done with a very pointed thin needle. The thread is flattened with the help of one's finger nail, and then the needle is pushed through the thread, of course if you can hit it. And the thinner the thread, the harder it is to hit it.
With a SMHAEN thread splitter, this is no longer a problem. and it does not matter if it is a thick or thin thread. The SMHAEN thread splitter does both easily. a smooth edge and a small knob on the end of the needle make it possible to split the thread. Flatten the thread on the shaft of the needle. Slide the thread to the knob at the end of the needle and allow the small edge to grip the individual fibers. Pull back slightly to allow the fibers to separate, then push the round knob through to split the thread into two strands.
OBS: Only single ply linear fiber threads can be split. Example: Since it is not a single ply, UNI-thread polyester types cannot be split.
The thread splitter handle is flat on one side to keep it from rolling off the table.
It just feels something special when you tie your flies with a quality tool, it gives so much greater joy and make the fly tying a much greater experience and pleasure. We think!
- Modern design
- Ergonomic look
- Easy to place on the thread
- Flat on one side to keep it from rolling off the table
- Perfect balanced weight
The thread splitter is in one size. It split single ply threads into two strands in different thread sizes.
TECHNICAL DATA:
Weight. 9 gram.
Length. 10,3 cm.
Diameter. 8 mm.
